Precision position detectors MP SCALE|Linear position detector|Connected type of linear position detector

MPS-C series

The handling companies : Nidec Machine Tool Corporation

Contact information for product inquiry
Contact Us

Features

LONG
Long stroke, up to 35m.
Easy connection, because of connector.
No air purge
Unaffected by dust, oil and condensation, and so air purge is unnecessary.
Water-proof for coolant is improved because no electrical exposed part.
Against heat
Since same heat expansion ratio with machine, strong to thermal expansion.
Stabel for a long time
No-contact! Stable high accuracy lasted for a long time.
ABS
Absolute detection is possible combining with battery backed-up encoder on the feed motor. (In case of FANUC and MITSUBISHI CNC)
CNC
Connectable with various NC's(FANUC, Mitsubishi CNC, SIEMENS, Mitsubishi servo)
特長

Application

Position detection for linear axis of large machine

Application of MPS-C series
Application of MPS-C series

Scale Type

Scale Type

Slider Type

Slider Type
Standard wiring output of Slider

Specifications

Scale
Scale type Effective stroke Accuracy ※1 Length Weight ※2
Scale MPS-25CSC 250mm×n-100mm 2.5μm 250mm 1.1kg
MPS-50CSC 500mm×n-100mm 4.0μm 500mm 2.1kg
MPS-75CSC 750mm×n-100mm 4.5μm 750mm 3.2kg
MPS-100CSC 1000mm×n-100mm 5.0μm 1000mm 4.2kg
Slider MPS-100DSL 101.6mm 0.5kg

Scale Stroke

The stroke is value which subtracted 100mm from the sum total of the length of selected Scales.
Ex)When MPS-100CSC are 3 pieces and MPS-75CSC is 1 piece, Scale stroke is,
1000mm × 3 pieces + 750mm - 100mm = 3650mm

Applicable A/D converter
NC Type Output signal Resolution Max. speed
FANUC ADB-K64FM
ADB-20J64
Serial I/F 0.01μm 1800m/min
Mitsubishi CNC 0.05μm
Various equipment ADB-20J10 Digital A/B/Z phase 0.1μm 80m/min
ADB-20J14 ※3
ADB-20J30 Analog A/B, digital Z phase 10μm/1 cycle
SIN wave

※1:Position error shows peak-to-peak. Interpolation error (Error within Scale 1 pitch) is not included.

※2:Wiring is not included in weight.

※3: When Scale stroke length is 4m or more, ADB-20J64 or ADB-20J14 are chosen.

Mounting Example

Mounting Example

Mounting holes of pushing method

Scale is mounted using the holes of A1 to A12 in below drawing. Please prepare Tap holes at the mounted side.

Holes mounting from pattern side

Mounting tap holes of pulling method

Scale is mounted using the tap holes of D1 to D5 in below drawing. In this case, the mounting part is performed the slot machining, as shown in below figure

Holes mounting from anti-pattern side

Dimensions

Dimensions
Dimensions

Unit : mm

Type K
Distance to
next Scale
Length L Attached
cable length
Existence of connector
mounted
Scale MPS-25CSC 250 249.85 Connectors attached to
both ends.
MPS-50CSC 500 499.85
MPS-75CSC 750 749.85
MPS-100CSC 1000 999.85
Slider MPS-100DSL 1.5m Attached
Tolerance +0.05~-0
Holes mounting from pattern side
Number of
mounting holes
A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1
Scale 3 239.2 124.9 10.6
6 489.2 374.9 260.6 239.2 124.9 10.6
9 739.2 624.9 510.6 489.2 374.9 260.6 239.2 124.9 10.6
12 989.2 874.9 760.6 739.2 624.9 510.6 489.2 374.9 260.6 239.2 124.9 10.6
Slider 2
Tolerance ±0.1
Type For cable clamp Number of
holes
For cable clamp
Number of
holes
E4 E3 E2 E1 Number of
mounting
holes
D5 D4 D3 D2 D1 Number of
holes
C2 C1
Scale MPS-25CSC 1 223.4 2 195 25 1 209
MPS-50CSC 2 250 223.4 3 460 275 25 1 209
MPS-75CSC 3 250 250 223.4 4 695 525 275 25 2 500 209
MPS-100CSC 4 250 250 250 223.4 5 965 775 525 275 25 2 500 209

At designing mounting, Please require and refer to the Scale mounting drawing.

Contact us

Nidec Machine Tool Corporation

Nidec Group Search