・Additive manufacturing machines specifications for this service
LAMDA 200
LAMDA 2000（Under development）
Max workpiece size（mm）
200×200×200
2,000x1,500x1,600
Laser power（kW）
2
6
Inert gas shield
Applicable
Applicable
Cutting spindle head
N/A
Applicable
NC two-axis table
Applicable
Not applicable
・Metal materials applicable for LAMDA
Material
Note
SUS304
A kind of general stainless
SUS316
Stainless steel with improved corrosion resistance from SUS304
Maraging steel
It is a material that achieves high strength and high toughness by adding Co, Mo, Ti, Al, etc. to 18% nickel steel.
Ti6Al4V (64 titanium)
Lightweight, high strength and highly corrosion resistant, it is widely used in medical, chemical and aerospace fields, but its machinability is no so good. inferior.
Inconel 718
A nickel alloy that has good material properties even at high temperatures and is suitable for high-temperature applications such as gas turbines.
Stellite6
It is a material with high hardness and excellent wear resistance, which is mainly composed of cobalt. Only surface cladding is supported.
Materials not listed may be able to be processed, so please feel free to contact us.
・Additive manufacturing machines specifications for this service
Types of metal material size after sintering
Description
Recommended size after sintering
50 mm cubic and minimum scale ordered is 0.1 mm.
Minimum size after sintering
1×1×3 mm
Maximum size after sintering
due to the size of the machines' print box
Material
Description
SUS316L
Stainless steel with improved corrosion resistance from SUS304
Pure copper
99.9% pure copper powder material prepared for BJT method
17-4PH(SUS630)
One of major precipitation hardening stainless steels, it has both corrosion resistance and high strength.
Ti6Al4V (64 titanium)
Lightweight, high strength and highly corrosion resistant, it is widely used in medical, chemical and aerospace fields, but its machinability is no so good. inferior.
DM625 equivalent to Inconel 625
It is a Ni-based alloy that has both high-temperature strength and corrosion resistance, and is used for engine parts and gas turbines.
DM247 equivalent to Inconel 247
It is used for turbine blades, etc. because it has the highest high-temperature strength among Ni-based alloys.
DM D2 equivalent to JIS SKD11
It is a tool steel with excellent hardenability while having excellent wear resistance and appropriate toughness.
Samples
LAMDA's manufacturing samples
One of the largest titanium samples processed in additive manufacturing in Japan,with a height of 1,430 mm.
Different materials such as Inconel and stainless steel can be deposited on steel base material.
Complicated shapes such as Tokkuri, which is a bottle of Japanese sake, can be manufactured using 5-axis indexing.
Hollow gear-shaped sample
DM P2500 manufacturing samples
Integrated modeling of multiple parts Ring and whistle cores can be modeled at once, no assembly required.
Complex shape modeling
5-axis machining is not needed and it leads to lead time shorten.
Hollow bolts & nuts Improved design and reduced weight are possible.
Free shape parts A shape that goes beyond the conventional design concept is possible
