Machine Tools|Machining Center|Horizontal Machining Center
Table-fixed model HPM40
Company: Nidec OKK Corporation
Target: Zero down time
This model's armless ATC and the chip pocket at the center of the bed enable HPM40 to mass produce units stably. In addition, an axial center cooling function is used for HPM40's axis ball screws.
- Inquiries about this product
- Contact information for inquiries:
TYPE A
Product's specifications
Travel on X/Y/Z axis | 600x600x500mm |
---|---|
Palette's dimensions | φ400mm |
Table's maximum loadable weight | 600kg |
Rapid traverse rate(X,Y,Z) | 50m/min |
Spindle speed | 12000min-1 |
Spindle inner taper | No. 40 |
Number of storable tools | 24 (OP:40) |
TYPE B
Product's specifications
Travel on X/Y/Z axis | 600x500x500mm |
---|---|
Palette's dimensions | φ400mm |
Table's maximum loadable weight | 600kg |
Rapid traverse rate(X,Y,Z) | 50m/min |
Spindle speed | 12000min-1 |
Spindle inner taper | No. 40 |
Number of storable tools | 24 |
The product's features
Armless ATC
This product adopts an armless ATC, a reliable component with few movable sections.
Chip outlet
This machine, which adopts a center trough structure, collects chips from immediately below its spindle.
Type A & B
Two types are available: Type A, which works with a gantry loader; and Type B, a compact and narrow model.